1/4" Square Carbide File

Square File & Notch Ceramic Wall Tiles, Fiberglass, Composites, Wood and more

SF4 - 1/4” (6mm) Square Carbide File - Combination 60/120 grit

A coarse & fine grit on opposing faces enables you to remove bulk material, rotate the tool and finish, all with the same tool. Super versatile, these 1/4” rod, carbide files, have carbide teeth that cut in all directions. This means they will cut on the forward and back strokes, thereby reducing the amount of filing time by half. They are equally at home working on ceramic wall tile as they are on wood. They cut like a ‘hot knife through butter’ on composite materials and are extremely useful tools to have in your toolbox.

FEATURES & BENEFITS:

• Very strong. Grit does not break loose.
• Cuts in both forward and backward directions with multi-directional teeth.
• A combination of coarse and fine grit on the SF4 square file, makes for a versatile tool. Start with the coarse, rotate 180 º and finish with the fine!
• Comfortable wooden handle

MATERIALS:

File and carve with ease on the following materials:

• Hard and soft woods
• Ceramic wall tile
• Fiberglass
• Composites
• Carbon Fibre
• Laminates
• Rigid Foam
• ABS 
• Rigid and flex PVC piping
• and more!
• (Not recommended for use on metal)

HT-SF4 - Square file - available as a combination 60/120 grit

To assist you with your selection of the appropriate grit grade for your DuraGRIT® carbide sanding tool, note some typical uses based on grit grades by reading the following knowledge base article:

What are Typical Uses (and suggested grit grades) for DuraGRIT Carbide Tools?
https://help.duragrit.com/article/21-what-are-typical-uses-for-duragrit-carbide-tools

Dimensions:

Diameter: 1/4" (6mm) square
Steel Rod Length: 7.5" (19cm) 
Gritted Length: 4.5" (11.5cm) 
Assembled Overall Length with Handle: 10" (25.4cm)

Click here for the RF4 - Round file - available in 60 or 120 grit