1-1/4" Carbide Cutting / Shaping Wheel

Cut, Shape & Finish All with 1 tool!

Model # SR-CS4-060

Price: $19.98

CS4 - Carbide Cutting/Shaping Wheel. 1-1/4” (32mm)

See full description below for more details...

Cut, Shape & Finish all with 1 tool!

CS4 - Carbide Cutting/Shaping Wheel. 1-1/4” (32mm)

The 1-1/4” CS4 is a strong and durable steel wheel, with aggressive 60 grit carbide on the edge and one face. Perform both cutting and shaping functions with the same tool; for example, cut and fit laminate floor & trim, create pockets in the jamb for a door strike (without splitting as with chisels), groove and bevel panels - all without having to change bits!

FEATURES & BENEFITS:

  • Cuts, shapes & finishes in one operation.
  • Mounted on an extra strong, steel mandrel (ESM)
  • #60 carbide grit coating on the edge and face of the wheel.
  • Use the edge for making up to 1/2” deep cuts.
  • Use the face of the wheel to shape, sculpt and hollow.
  • Can be ‘pushed’ perpendicular to the shaft to create pockets and hollows.
  • Minimal chipping on finished surfaces such as fibreglass and/or melamine
  • Very strong steel wheel. Won’t shatter.
  • Grit won’t tear loose.

MATERIALS:

Cuts, carves and sands great on the following materials:

  • Hard and soft woods
  • MDF, Oak & Pine molding
  • Fiberglass
  • Composites
  • Carbon Fibre
  • Laminates
  • ABS plumbing
  • Rigid and flex PVC piping
  • Rubber hose
  • Plastic garden hose
  • Engineered wood floor (up to 5/8” thick)
  • Laminate ‘click’ floor
  • Gourds
  • and more!
  • (Not recommended for use on metal)

SUGGESTED APPLICATIONS:

Versatile D.I.Y. cutting and shaping tool

  • Cut-off and shape planks & dowels
  • Trim wood/fibreglass/plastic/carbon-fibre and composites up to 1/2” thick
  • ‘Push/grind’ and create ‘pockets’ for door strike plungers and deadbolts
  • Cut out air register apertures in laminate ‘click’ floor
  • ‘Cope’ Mitred baseboard corners
  • Cut-off ABS and PVC plumbing pipes, plastic gutters and rubber hoses
  • Create slots and pockets in wood cabinets, boxes, gourds etc
  • Create bevels on wood or even marble trophy bases
  • Cut ‘V’ channels and grooves
  • and more!

To assist you with your selection of the appropriate grit grade for your DuraGRIT® carbide sanding tool, note some typical uses based on grit grades by reading the following knowledge base article:

What are Typical Uses (and suggested grit grades) for DuraGRIT Carbide Tools?
https://help.duragrit.com/article/21-what-are-typical-uses-for-duragrit-carbide-tools

Diameter: 1-1/4" (32 mm)
Depth of Cut: 1/2” (13 mm)
Kerf: 0.064” (1.62 mm)
Extra Strength Mandrel: 1/8" (3 mm)
Grit Grade: 60 grit

KERFS for various DuraGRIT Cutting Wheels (width of groove):

(Kerf widths are approximate and will vary according to density and grain of the material being cut)

Versatile 4 pc. DIY / Woodworking Set 1/2" Carbide Hole Saw Sander 1/8" Carbide Pointed Burr
$61.98
$17.98
$14.98
 
5" DuraDisc™ Carbide Sanding Disc 360° Carbide Scroll Saw Blade 90° Carbide TruSander Block Sander
$42.48
$14.98
$38.23
 
9" Carbide Flat Sanders 1/4" Round Carbide File 1/4" Square Carbide File
$19.98
$19.98
$21.98
 
Woodworkers Carbide Tool Set
$215.78
Average customer rating:
 
(34 reviews)  





34 Most recent customer reviews (see all reviews):
Carol Foster
Mar 22, 2015
Five Stars
works like I had hoped.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R3OH322BJ3JWQT/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (1)
Faisal Abbas
Mar 12, 2015
Five Stars
Excellent.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1OYQFJDT88EWG/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
David Quintana
Feb 22, 2015
Five Stars
Recommended. Very good products. Thanks!!

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/RGB47E16AB7US/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (1)
Aaron L. Dunphy
Feb 16, 2015
I love this bit
I love this bit. Pricey but works well. I use this to neaten up my cuts when I cope moulding.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R3BJL8DFPQ29DO/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
John Mielke
Jan 9, 2015
satisfied

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/RM4QREGYQ0YLX/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
G. Newman
Nov 26, 2014
Five Stars
Works well.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/RSOYKR8SR7GOE/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
W****s59
Nov 19, 2014
Fantastic!

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R21AEV03MSPU2P/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Dominic Zerbolio "DrZ"
Oct 29, 2014
This cutter is a BRUTE. I bought it to cut slots for wires on the edges of 3/8" to 1/4" material, and it really does the job.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/RPYFSKQTH303A/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
J Henry
Oct 25, 2014
Finally a cutting wheel that did the job. After burning my way through several cutting discs trying to cut through some really old Masonite, this blade more than met my expectations and needs. Haven't tried it on laminate yet, but feel confidant it can handle that job too.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R2ZW381RXFCTLH/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
Davide Bertuzzi
Oct 16, 2014
All Ok, perfect product, super fast shipping and perfect seller, thank you!!!!

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1QJH8OR6QMPMQ/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Betty F.
Aug 7, 2014
Five Stars
Cuts wood like butter.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R2UWCID99RR4T3/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
lennox ling
Jul 23, 2014
The 1-1/4 cutting/shaping wheel worked great I cut plastic and wood and it worked just great.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1E0GLC4AYU1H5/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Jack Von Strauss
Apr 21, 2014
Great Tool
Works great! Does just what it says.It cuts and shapes wood, I used it on Mahogany and it was like butter.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1GPW5HMUM6PYS/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
randy winegardner
Apr 18, 2014
I love it
Works great

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1T8UMIBJ9SPAO/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
---Desmon Zoi---
Mar 24, 2014
cuts through plastic and fiberglass.

Pros:
Cuts quickly and easily.
Can be used as a grinder on some materials.
Deep cut.

Cons:
Can not be used to grind plastic.(melts)
Gets gummed up a bit(seems to still cut/grind like new)

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/RZDT9J3TJOCVS/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Jose Then
Jan 27, 2014
I LIKE IT VERY MUCH.
IT IS AN EXCELLENT TOOL FOR SMALL THINGS.
WORK VERY WELL WITH WOOD, PLASTIC, AND MICA.
I LIKE IT SO MUCH.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R2PSONTP4NC2QN/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
SteveDHL
Sep 10, 2013
Perfect for cutting pages out of books.
My wife bought this attachment for craft/art projects that she works on. She uses this to cut out the center of the pages from a book to make 3D shadowbox type art inside. She tried various other methods that either didn't work well or was a lot of work. This attachment was perfect.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R259CUVSYDHMQT/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
jeremy
Jul 26, 2013
Works
The 1-1/4 inch Cutting/Shaping Wheel is useful when working small projects. Happy with listing but product is a bit expensive for what you are getting. Price is however, comparably similar to that of local home improvement stores. Overall happy with product.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R3OJQK9RV1J0BO/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
MURALI GANUMPALLY
Jul 7, 2013
Good quality item.
Very quality wheel. its more than two years and still it is working great. Definitely recommended to every one who is looking for this wheel.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R2M1U17K63O95L/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
TjU
May 9, 2013
Cuts gud.
Made a feather wand out of black walnut with this tool. Carved an eagle talon holding a globe on one end and a curved holder on the other, connected by a rough hewn dowel.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1PYQ4OKJXJI3Q/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (2) / No (0)
Ahmad Youssef Nour
Apr 3, 2013
GOOD TOOL, USUALLY I DESIGN MY YACHT MODELS SO USE A LOT OF FINE TOOLS , I NOMINATE THEM FOR A 5 STARS

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R15KOBGK28LJT4/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
Benjamin Hollis
Mar 28, 2013
freaking awesome
great little cutting disk. easy to cut straight with and cuts like a hot knife through butter. cutting depth is only about 1/2" and do wish it was a bit more but still really like this cutting wheel

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R25R8RBD5MP493/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Crystal
Feb 19, 2013
Like a dream.
I was set to complete my son's pinewood derby car. I was able to cut smooth, detailed lines with out burning the wood or having to do a ton of sanding later. My son received 1st place in Derby design. A great product.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1RCLL33M8Z59O/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (2) / No (0)
sam
Jan 8, 2013
wow
ready for work now it very easy to use and very power full, glad that I bought this one. yes.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1UB6LNRW0C0LM/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
DeusEx
Jun 3, 2012
Great cutter!
I've used this so far on plactic and wood and been very impressed. It cuts quick and clean. The only issue is due to the rotation you get a tendency for this wheel to hop if you aren't paying attention or you try to fight it. Also a word of caution, be careful when setting this down after use, it's large enough to catch clothing or flooring as it spools down to a stop.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R2V4YNNUMI5CTQ/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (2) / No (0)
Lori
Apr 23, 2012
Works
Great cutting wheel. Works with my Black and Decker. No wobble, stays sharp. I am very happy with it. Mind you, I only worked with wood using this blade.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R386ILA4AM8X6W/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
Twcorleyjr
Jan 30, 2012
This was the first time to use this wheel. It is outstanding at cutting and shaping the wood for my lures. It is excellently made.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1Z68CBNI4AADQ/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
C. Huang
Dec 1, 2011
Good tool for carving/cutting etc... easy to use, very durable. Must have for any wood working. Combine this with the sander that came with the dremel kit and you'll be able to make sophisticated objects with great looking finishes.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R24H0BGEJ8Z2QD/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
Arklan Uth Oslin
Sep 17, 2010
Great for shaping!
I love this thing. absolutely excellent for material removal and shaping in wood. with this and another cutting bit, i found myself randomly making very cool looking wood carvings, something i've never done in any way before. absolutely love this.

only reason for 4 stars is the difficulty to cut straight lines. as another reviewer said, it can be done, but it's not the ideal use of this tool.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1IJ76V4RUEI5I/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (0) / No (0)
Rachel C. Kirin "Tinkerer"
May 1, 2009
Does exactly what it advertised.
Cuts into soft/medium wood quickly and grinds edges in a snap. Not the easist thing in the world to cut a straight line with, but it can be done if you go left to right and let the blade creating a starting groove.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R29LLX6MW95V98/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (2) / No (0)
G. Robinson "Extensive reader"
Mar 13, 2009
Excellent tool for soft materials and good for harder
Not usefull for very soft plastics but great for softwoods. OK for harder materials like Teak and Ironwood as well as PC boards but not nearly as useful. Does it all in most plastics and softwoods though.

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R1O29P2V72DUPY/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (1) / No (0)
T. Lilly
Mar 3, 2009
I do quite a bit of woodworking and this disk has been great! I also have the one with carbide only on the edges which I thought was fantastic. Now this one has carbide all over = more wood removal. It works great in my wecheer and harbor freight pneumatic rotary tools, and would be great in a dremel. If you are looking for the one "go to" bit for small rotary tools, then this would be it. It hogs, sands, cuts, and just about everything without problems.
(Note - I only use on wood)

(Verified Purchase and Reviewed on Amazon.com)
http://www.amazon.com/gp/review/R304NY5B4D2310/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B000HI5WUS
Loading...Was the above review useful to you? Yes (2) / No (0)
Conway B.
Dec 14, 2008
This customer purchased the item at our site.
I was Googling "mini-circular saw blades, thinking of a mini-blade with teeth that I could put on a mandrel and use on a special project, when I found the following site/link: http://hardwareaisle.thisoldhouse.com/2008/09/dura-grit-makes.html

I hadn't heard of your product before, but it looked like it would do the job, and the rest is history, as they say.
 
Regards,  
Conway B. - Oregon
Loading...Was the above review useful to you? Yes (0) / No (0)
Aaron S.
Dec 4, 2008
This customer purchased the item at our site.
I finally got the time to start using my new Dura-Grit bits yesterday. Very soon after starting my project, I said: Oooh BABY! This is fun. Cuts and shapes hardwood like butter. Thanks for making a great product which will make my life easier and more productive!

Aaron S. - Tucson, AZ
Loading...Was the above review useful to you? Yes (0) / No (0)

Send to friend
DuraGRIT Tungsten Carbide Tools and Burrs That Really Work and Work

FREE SHIPPING WITHIN THE USA!
or Worldwide Shipping available at cost via USPS from USA - Prices in $USD

The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.