 
Price: $14.98 USD |
Price: $11.98 USD
|
Price: $14.98 USD
|
Price: $14.98 USD |
Price: $14.98 USD |
Diameter: 1-1/2"
Model #: SR-CW5
Grit Grade: 60
A
great new carbide cutting wheel with a thinner kerf and a deeper cut!
Use this wheel for cutting most household materials
including: Hard and soft woods, MDF & Pine moulding, Fiberglass moulds, ABS plumbing, PVC piping, Rubber hose, Garden hose, Laminate floor, and more! |
Diameter: 1-1/4"
Model #: SR-CW4
Grit Grade: 60
The gritted edge of this bigger wheel cuts cleanly and quickly
up to a full 1/2" in depth. Great for hobbies, crafts and DIY
jobs about the house.
|
Diameter: 1-1/4"
Model #: SR-CS4
Grit Grade: 60
This tool is great for deeper cutting and shaping, enabling you to perform both
without having to change bits. Great for many jobs including fitting 'Engineered,
laminate floors'. |
Diameter: 1"
Model #: SR-CW1
Grit Grade: 80, 120
Cuts, shapes & finishes in one operation.
Great as a cut-off wheel
for modelling
& smaller work pieces.
|
Diameter: 1-1/4"
Model #: SR-MSW
Grit Grade: 46, 60, 120
This incredible tool sculpts & sands in one operation.
Great for compound curves
in carving, modelling and DIY.
|
Price: $11.98 USD |
Price: $11.98 USD |
Price: $11.98 USD
|
Price: $11.98 USD |
Price: $11.98 USD
|
|
Diameter: 7/16"
Model #: SR-ATB
Grit Grade: 60, 80
Use to smooth irregular surfaces, fit drawers, door & window frames,
cabinet shelving, etc. |
Diameter: 1/4"
Model #: SR-CTB
Grit Grade: 60, 80
Cut holes, slots & irregular shapes in wood, wallboard, wall tile,
etc. Countersink screw holes. Start and enlarge holes. |
Diameter: 1/4"
Model #: SR-FHB
Grit Grade: 60, 80
Similar uses to ordinary paper drums but with added benefit
of end sanding
and much longer life. |
Diameter: 1/4"
Model #: SR-REB
Grit Grade: 60, 80
Dimple carvings, 'write' carved name boards and signs. Cut channels
in wallboard, wood trim or base board to accomodate data, phone and
speaker wiring. |
Diameter: 1/4"
Model #: SR-BEB
Grit Grade: 60, 80
Undercutting in low relief carvings. Countour cavities in blanks and
moulds. 'Open cut' interior of solid forms such as aircraft nose cones
and decoy eye sockets, etc. |
Price: $11.98 USD |
Price: $11.98 USD |
Price: $11.98 USD |
Price: $11.98 USD |
Price: $11.98 USD |
| Diameter: 3/8"
Model #: SR-SP4
Grit Grade: 60, 80
A wonderful 3/8" steel, spherical
ball coated in carbide and available in 60 & 80 grit.
This great tool is terrific for dimpling and channelling. |
Diameter: 1/2"
Model #: SR-SD2
Grit Grade: 80, 120
Create channels, bevels & corners or smooth rough surfaces.
Great long life
drum for those who have Dremel 1/2" rubber arbor (not included).
No more
need to constantly change drums!
|
Diameter: 1/4"
Model #: SR-SD4
Grit Grade: 80, 120
Create channels, bevels & corners in smaller spaces.
Great long life drum
for those who have Dremel 1/4" rubber arbor (not included).
No more need
to constantly change drums! |
Diameter: 3/8"
Model #: SR-HTB
Grit Grade: 60, 80
Use as a router accessory for rabets and edge grooves.
Great as a mini hole
saw! |
Diameter: 1/2"
Model #: SR-HT2
Grit Grade: 60, 80
1/2" Hollow drum, performs same sanding/smoothing function
as 1/2" sanding band but doesn't need fitting on a rubber arbor.
Additionally, this wonderfully useful tool has grit on the edge opening and
will double as a hole saw.
Available in 60 & 80 grit. |
| |
Price: $8.98 USD |
|
Price: $8.98 USD |
|
| |
Diameter: 1/8"
Model #: SR-PB8
Grit Grade: 80, 120, 240
This tungsten carbide pointed burr is great for detail work
in carving, modelling and general crafts. |
|
Diameter: 1/8"
Model #: SR-SB8
Grit Grade: 80, 120, 240
This tungsten carbide straight burr is great for detail work in carving,
modelling and general crafts. |
|
