Dura-GRIT:
The Most Versatile Cutting & Shaping Tools
You'll Ever Use!
Long-Lasting, High Performance
Carbide Burrs 1/8" dia. Shafts - Run at Speeds Up
To 35,000 RPM!
Use on DREMEL®,
Foredom®,
WeCheer® Ryobi®,
Black & Decker®,
Sears Craftsman®,
Proxxon®
and Other High Speed Drills. You'll have a hard time running
out of ways to use them!
NEW! HIGH PERFORMANCE CARBIDE WHEELS FOR YOUR HIGH SPEED DRILL!
For cuts up to 5/8" deep and a narrow
kerf, this wheel is great for cutting and trimming laminate
floor planks, MDF and Pine trim, ABS plumbing, Rubber hose
and more...
Carbide Cutting Wheel
1-1/4" diameter CW4-060
With cuts up to 1/2" deep, this has proven to be
one of the best tools to use for grout removal between tiles!
This carbide cutting wheel also cuts wood, plastics and fiberglass
up to 1/2" depth.
Mushroom Shaping
Wheel
1-1/4" diameter MSW-060
For compound curves and sculpting, this
is a unique wheel that is primarily designed to sculpt compound
curves but is so powerful at material removal, it has a million
uses!
A full 1/2" depth carbide cutting wheel with 'chamfering'
and 'pocketing' abilities. Sink the CS4 in a door jamb and
'push carve' a pocket for the door strike
LONG LIFE TUNGSTEN CARBIDE HIGH SPEED ROTARY TOOLS!
1/8" dia. Shafts - Run at Speeds Up To 35,000 RPM!
Use on DREMEL, Foredom, WeCheer, Ryobi, Black & Decker and Other High Speed Drills.
NEW! Larger Carbide Cutting Wheel
Price: $14.98 USD
Carbide Cutting Wheel
Price: $11.98 USD
Combo Carbide Cutting & Shaping Wheel
(1-1/4")
Price: $14.98 USD
Combo Carbide Cutting & Shaping Wheel
(1")
Price: $14.98 USD
Carbide Mushroom Shaping Wheel
Price: $14.98 USD
Diameter: 1-1/2" Model #: SR-CW5 Grit Grade: 60
A
great new carbide cutting wheel with a thinner kerf and a deeper cut!
Use this wheel for cutting most household materials
including: Hard and soft woods, MDF & Pine moulding, Fiberglass moulds, ABS plumbing, PVC piping, Rubber hose, Garden hose, Laminate floor, and more!
Diameter: 1-1/4" Model #: SR-CW4 Grit Grade: 60
The gritted edge of this bigger wheel cuts cleanly and quickly
up to a full 1/2" in depth. Great for hobbies, crafts and DIY
jobs about the house.
Diameter: 1-1/4" Model #: SR-CS4 Grit Grade: 60
This tool is great for deeper cutting and shaping, enabling you to perform both
without having to change bits. Great for many jobs including fitting 'Engineered,
laminate floors'.
Diameter: 1" Model #: SR-CW1 Grit Grade: 80, 120
Cuts, shapes & finishes in one operation.
Great as a cut-off wheel
for modelling
& smaller work pieces.
Diameter: 1-1/4" Model #: SR-MSW Grit Grade: 46, 60, 120
This incredible tool sculpts & sands in one operation.
Great for compound curves
in carving, modelling and DIY.
Carbide Aspirin Tip Burr
Price: $11.98 USD
Carbide Conical Tip Burr
Price: $11.98 USD
Carbide Flat Head Burr
Price: $11.98 USD
Carbide Rounded End Burr
Price: $11.98 USD
Carbide Ball End Burr
Price: $11.98 USD
Diameter: 7/16" Model #: SR-ATB Grit Grade: 60, 80
Use to smooth irregular surfaces, fit drawers, door & window frames,
cabinet shelving, etc.
Diameter: 1/4" Model #: SR-CTB Grit Grade: 60, 80
Cut holes, slots & irregular shapes in wood, wallboard, wall tile,
etc. Countersink screw holes. Start and enlarge holes.
Diameter: 1/4" Model #: SR-FHB Grit Grade: 60, 80
Similar uses to ordinary paper drums but with added benefit
of end sanding
and much longer life.
Diameter: 1/4" Model #: SR-REB Grit Grade: 60, 80
Dimple carvings, 'write' carved name boards and signs. Cut channels
in wallboard, wood trim or base board to accomodate data, phone and
speaker wiring.
Diameter: 1/4" Model #: SR-BEB Grit Grade: 60, 80
Undercutting in low relief carvings. Countour cavities in blanks and
moulds. 'Open cut' interior of solid forms such as aircraft nose cones
and decoy eye sockets, etc.
NEW! Carbide
Sphere Burr
Price: $11.98 USD
Carbide Sanding Drum (1/2")
Price: $11.98 USD
Carbide Sanding Drum (1/4")
Price: $11.98 USD
Carbide Hollow Tip Burr (3/8")
Price: $11.98 USD
NEW! Carbide
Hollow Tip Burr (1/2")
Price: $11.98 USD
Diameter: 3/8" Model #: SR-SP4 Grit Grade: 60, 80
A wonderful 3/8" steel, spherical
ball coated in carbide and available in 60 & 80 grit.
This great tool is terrific for dimpling and channelling.
Diameter: 1/2" Model #: SR-SD2 Grit Grade: 80, 120
Create channels, bevels & corners or smooth rough surfaces.
Great long life
drum for those who have Dremel 1/2" rubber arbor (not included).
No more
need to constantly change drums!
Diameter: 1/4" Model #: SR-SD4 Grit Grade: 80, 120
Create channels, bevels & corners in smaller spaces.
Great long life drum
for those who have Dremel 1/4" rubber arbor (not included).
No more need
to constantly change drums!
Diameter: 3/8" Model #: SR-HTB Grit Grade: 60, 80
Use as a router accessory for rabets and edge grooves.
Great as a mini hole
saw!
Diameter: 1/2" Model #: SR-HT2 Grit Grade: 60, 80
1/2" Hollow drum, performs same sanding/smoothing function
as 1/2" sanding band but doesn't need fitting on a rubber arbor.
Additionally, this wonderfully useful tool has grit on the edge opening and
will double as a hole saw.
Available in 60 & 80 grit.
Carbide Pointed Burr
Price: $8.98 USD
Carbide Straight Burr
Price: $8.98 USD
Diameter: 1/8" Model #: SR-PB8 Grit Grade: 80, 120, 240
This tungsten carbide pointed burr is great for detail work
in carving, modelling and general crafts.
Diameter: 1/8" Model #: SR-SB8 Grit Grade: 80, 120, 240
This tungsten carbide straight burr is great for detail work in carving,
modelling and general crafts.
){kind=small}
