Dura-GRIT:
The Most Versatile Cutting & Shaping Tools
You'll Ever Use!
Long-Lasting, High Performance
Carbide Burrs 1/8" dia. Shafts - Run at Speeds Up
To 35,000 RPM!
Use on DREMEL®,
Foredom®,
WeCheer® Ryobi®,
Black & Decker®,
Sears Craftsman®,
Proxxon®
and Other High Speed Drills. You'll have a hard time running
out of ways to use them! Ideal for use on: Hard and soft woods, Laminates, MDF, Fiberglass, Carbonfibre, ABS, PVC, Rubber, Leather, and more! (Not for use on metal.)
For cuts up to 5/8" deep and a narrow
kerf, this wheel is great for cutting and trimming laminate
floor planks, MDF and Pine trim, ABS plumbing, Rubber hose
and more...
Carbide Cutting Wheel
1-1/4" diameter CW4-060
With cuts up to 1/2" deep, this has proven to be
one of the best tools to use for grout removal between tiles!
This carbide cutting wheel also cuts wood, plastics and fiberglass
up to 1/2" depth.
Mushroom Shaping
Wheel
1-1/4" diameter MSW-060
For compound curves and sculpting, this
is a unique wheel that is primarily designed to sculpt compound
curves but is so powerful at material removal, it has a million
uses!
A full 1/2" depth carbide cutting wheel with 'chamfering'
and 'pocketing' abilities. Sink the CS4 in a door jamb and
'push carve' a pocket for the door strike
LONG LIFE TUNGSTEN CARBIDE HIGH SPEED ROTARY TOOLS!
1/8" dia. Shafts - Run at Speeds Up To 35,000 RPM!
Use on DREMEL, Foredom, WeCheer, Ryobi, Black & Decker and Other High Speed Drills.
NEW! Larger Carbide Cutting Wheel
Price: $14.98 USD
Carbide Cutting Wheel
Price: $11.98 USD
Combo Carbide Cutting & Shaping Wheel
(1-1/4")
Price: $14.98 USD
Combo Carbide Cutting & Shaping Wheel
(1")
Price: $14.98 USD
Carbide Mushroom Shaping Wheel
Price: $14.98 USD
Diameter: 1-1/2" Model #: SR-CW5 Grit Grade: 60
A
great new carbide cutting wheel with a thinner kerf and a deeper cut!
Use this wheel for cutting most household materials
including: Hard and soft woods, MDF & Pine moulding, Fiberglass moulds, ABS plumbing, PVC piping, Rubber hose, Garden hose, Laminate floor, and more!
Diameter: 1-1/4" Model #: SR-CW4 Grit Grade: 60
The gritted edge of this bigger wheel cuts cleanly and quickly
up to a full 1/2" in depth. Great for hobbies, crafts and DIY
jobs about the house.
Diameter: 1-1/4" Model #: SR-CS4 Grit Grade: 60
This tool is great for deeper cutting and shaping, enabling you to perform both
without having to change bits. Great for many jobs including fitting 'Engineered,
laminate floors'.
Diameter: 1" Model #: SR-CW1 Grit Grade: 80, 120
Cuts, shapes & finishes in one operation.
Great as a cut-off wheel
for modelling
& smaller work pieces.
Diameter: 1-1/4" Model #: SR-MSW Grit Grade: 46, 60, 120
This incredible tool sculpts & sands in one operation.
Great for compound curves
in carving, modelling and DIY.
Carbide Aspirin Tip Burr
Price: $11.98 USD
Carbide Conical Tip Burr
Price: $11.98 USD
Carbide Flat Head Burr
Price: $11.98 USD
Carbide Rounded End Burr
Price: $11.98 USD
Carbide Ball End Burr
Price: $11.98 USD
Diameter: 7/16" Model #: SR-ATB Grit Grade: 60, 80
Use to smooth irregular surfaces, fit drawers, door & window frames,
cabinet shelving, etc.
Diameter: 1/4" Model #: SR-CTB Grit Grade: 60, 80
Cut holes, slots & irregular shapes in wood, wallboard, wall tile,
etc. Countersink screw holes. Start and enlarge holes.
Diameter: 1/4" Model #: SR-FHB Grit Grade: 60, 80
Similar uses to ordinary paper drums but with added benefit
of end sanding
and much longer life.
Diameter: 1/4" Model #: SR-REB Grit Grade: 60, 80
Dimple carvings, 'write' carved name boards and signs. Cut channels
in wallboard, wood trim or base board to accomodate data, phone and
speaker wiring.
Diameter: 1/4" Model #: SR-BEB Grit Grade: 60, 80
Undercutting in low relief carvings. Countour cavities in blanks and
moulds. 'Open cut' interior of solid forms such as aircraft nose cones
and decoy eye sockets, etc.
NEW! Carbide
Sphere Burr
Price: $11.98 USD
Carbide Sanding Drum (1/2")
Price: $11.98 USD
Carbide Sanding Drum (1/4")
Price: $11.98 USD
Carbide Hollow Tip Burr (3/8")
Price: $11.98 USD
NEW! Carbide
Hollow Tip Burr (1/2")
Price: $11.98 USD
Diameter: 3/8" Model #: SR-SP4 Grit Grade: 60, 80
A wonderful 3/8" steel, spherical
ball coated in carbide and available in 60 & 80 grit.
This great tool is terrific for dimpling and channelling.
Diameter: 1/2" Model #: SR-SD2 Grit Grade: 80, 120
Create channels, bevels & corners or smooth rough surfaces.
Great long life
drum for those who have Dremel 1/2" rubber arbor (not included).
No more
need to constantly change drums!
Diameter: 1/4" Model #: SR-SD4 Grit Grade: 80, 120
Create channels, bevels & corners in smaller spaces.
Great long life drum
for those who have Dremel 1/4" rubber arbor (not included).
No more need
to constantly change drums!
Diameter: 3/8" Model #: SR-HTB Grit Grade: 60, 80
Use as a router accessory for rabets and edge grooves.
Great as a mini hole
saw!
Diameter: 1/2" Model #: SR-HT2 Grit Grade: 60, 80
1/2" Hollow drum, performs same sanding/smoothing function
as 1/2" sanding band but doesn't need fitting on a rubber arbor.
Additionally, this wonderfully useful tool has grit on the edge opening and
will double as a hole saw.
Available in 60 & 80 grit.
Carbide Pointed Burr
Price: $8.98 USD
Carbide Straight Burr
Price: $8.98 USD
Diameter: 1/8" Model #: SR-PB8 Grit Grade: 80, 120, 240
This tungsten carbide pointed burr is great for detail work
in carving, modelling and general crafts.
Diameter: 1/8" Model #: SR-SB8 Grit Grade: 80, 120, 240
This tungsten carbide straight burr is great for detail work in carving,
modelling and general crafts.
Dura-GRIT's Long-Life Tungsten Carbide
Sanding Tools
Last Hundreds of Times Longer than Sandpaper!
See the TruSander in Action!
TruSander - 90° Carbide Sanding Block
Lasting hundreds of times longer than ordinary sandpaper, this remarkable,
long life tungsten carbide sanding block, is more than just a sanding
block!
A ‘GREEN’ alternative to using sandpaper
Doesn’t wear down. Same grit grade every time you use it
True sand and finish sawn edges, 90° to
the work surface
Round corners quickly and cleanly
Surface sand large areas comfortably with the ergonomically designed
wood handle
De-burr sawn edges, leaving crisp corners
Clear sawdust easily by tapping the handle
on the bench
Available in 60, 80, 120 & 150 grit
See these Carbide Sanding Files in Action!
Carbide Sanding Files
1/4" Round File:
Open cut holes & irregular shapes in wall tiles for fitting pipes
and trim.
1/4" Square File:
A coarse & fine grit on opposing faces enables you to remove bulk
material, rotate the tool and finish, all with the same tool.
See the Carbide Flat Sander in Action!
Carbide Flat Sanders
Dura-GRIT Carbide Flat Sanders are thin enough to get into tight spaces,
yet more aggressive and long lasting than regular files. Available
in 60 or 120 grit, or a unique 60/120 grit combination.
Ultra-FLEX Carbide Sanding Sheets
Ultra-Flex is easy to form to any shape. It won't wear or tear the
way sandpaper does and will remain the same grit grade for each use!
Steel backed Ultra-Flex is so thin it can be cut with scissors.
Carbide Block Sander
Tired of replacing worn sandpaper? This remarkable 80 grit tool outlasts
sandpaper hundreds of times!
Replacable Carbide Sheets available in 46, 60, 80 and 150 Grit.
Dura-GRIT's Long-Life Tungsten Carbide
Sanding Tools
Last Hundreds of Times Longer than Sandpaper!
See the DuraDisc in Action!
DuraDisc™ - 5" Carbide Sanding
Disc
NEW Additional
Grits are now available!
These versatile, long life carbide discs can be installed on bench
sanders or random orbital sanders.
A custom designed, self adhesive 'loop' pad is included with the disc for
5 and 8 hole, loop system sanders.
Sand hard and soft woods, composites and even grind ceramic wall
tile
Suitable for 5 and 8 hole, loop system sanders.
Long lasting carbide grit. Virtually the same grit grade every
time you use it!
Spend less time changing worn discs, more
time sanding
Easy on the Landfill. A 'GREEN' alternative to using sandpaper.
Now Available in 46, 60, 80 and 120 grit!
FREE with every DuraDisc!
Heavy Duty Hook & Loop Conversion Kit for DuraDisc™
NEW! Specifically designed to secure your heavy duty 5" carbide DuraDisc to most existing 5 or 8 hole orbit sanders. Also works with your regular disposable loop back discs.
Compatible with Bosch, DeWalt, Ryobi, Porter Cable, Ridgid and more...
This Hook & Loop Conversion Kit is included FREE with every DuraDisc purchase! (a $5.98 value!)
Heavy Duty Replacement Loop Backing Pads for DuraDisc™ (2 Pack)
NEW!Two replacement heavy duty loop backing pads to further extend the awesome working life of your carbide DuraDisc.
Unlike disposable sanding discs, you won't want to throw away your DuraDisc after using it. It has an incredible long working life. From time to time, you might want to replace the loop backing pad, to further extend the useful working life of your carbide disc!
See the Scroll Saw Sander in Action!
Carbide Scroll Saw Sander
Designed as a sander and as a saw blade, the Dura-GRIT Scroll Saw
Sander is as versatile as it is durable.
Fits Dremel® scroll saws and most other scroll saws with enough
clearance in the table to accept a 3/8" wide blade.
Works Great with any 1/4" Drill at Speeds
up to 20,000 RPM! Perfect for D.I.Y. Projects!
Large Conical Tip:
1/4"dia. x 2-1/4" long.
Cut holes, slots & irregular shapes in wood, wallboard, wall tile,
etc. Countersink screw holes. Start and enlarge holes.
Large Flathead Tip:
1/4"dia. x 2-1/4"long.
Use gritted tip to cut holes, slots & irregular shapes in wood, wallboard,
wall tile, etc. Use side of cylinder to shape, bevel and grind.
Large Rounded Tip:
1/4"dia. x 2-1/4"long.
Dimple, carve, mould and grind using this rounded tip and the long, gritted,
cylidrical sides. Cut channels & slots in wood, fiberglass, wallboard,
compound materials, etc.
SAVE
UP TO 15% ON TOOL SETS
){kind=small}
